Accessories and equipment BL BH

Coupling for corrugated pipes

Coupling PIPE-PIPE for corrugated pipes is made of PE.
Color: white / transparent.
Designed for connecting corrugated pipes. Protection class IP40. The coupling is a joint element for the joint of two corrugated pipes of the same diameter.
Operating temperature: from -40 ° С to + 90 ° С

Coupling

PIPE-PIPE coupling with stopper for corrugated or rigid smooth pipes is made of ABS plastic.
Colors: RAL 7035 (gray) and RAL 9005 (black).
Designed for connecting corrugated or rigid pipes. Protection class IP40. The coupling is a joint element for the joint of two corrugated or rigid smooth pipes of the same diameter.
Operating temperature: from -25 ° С to + 60 ° С

Pipe-box

coupling The PIPE-BOX coupling for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 7035.
Protection class IP65.
Designed for hermetic connection of rigid pipes with open wiring in damp and damp rooms (for example: basements, sinks, working area of ​​a communal kitchen) or outside buildings. The coupling is a transition from the pipe directly to the junction box or power panel.

Cable gland with lock

nut Cable gland for corrugated - armored pipe made of nylon 6.6.
Color: RAL 7035.
Protection class IP65. Designed for tight connection of corrugated / reinforced pipes (sometimes rigid) with open wiring in wet and damp rooms (example: basements, sinks, working area of ​​public kitchens) and outside buildings. The coupling is a transition from the pipe directly to the junction box or power panel and the tight seal of the cable outlet is additionally fixed with a lock nut.

Coupling "pipe-pipe" IP65

Coupling type PIPE-PIPE hermetic for corrugated - reinforced pipes made of ABS plastic or self-extinguishing PVC.
Color: RAL 7035.
Protection class IP65.
Designed for tight connection of corrugated / reinforced pipes with rigid smooth pipes with open wiring in wet and damp rooms (example: basements, sinks, working area of ​​public kitchens) and outside buildings. The coupling is a transition from a reinforced pipe of a smaller diameter to a rigid pipe of a larger diameter
Operating temperature: from -25 ° С to + 60 ° С

90 ° angle (single) Single

angle 90 ° of the PIPE-PIPE type for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 7035.
Designed for connecting corrugated or rigid pipes at an angle of 90 °. Protection class IP40. The angle is usually used to connect rigid smooth pipes, forming a 90 ° bypass in the rigid version.

Composite

bend 90 ° (in two parts) Composite bend 90 ° of the "PIPE-TUBE" type is intended for joining corrugated or smooth / rigid pipes at an angle of 90 °. Consists of two symmetrical snap-on parts for safe and quick installation.
Color: RAL 7035 (gray).
Protection class IP40.
Operating temperature: from -25 ° С to + 60 ° С

Composite

bend 90 ° (in two parts) Composite bend 90 ° of the "PIPE-TUBE" type is intended for joining corrugated or smooth / rigid pipes at an angle of 90 °. Consists of two symmetrical snap-on parts for safe and quick installation.
Color: RAL 9005 (black).
Protection class IP40.
Operating temperature: from -25 ° С to + 60 ° С

Opening tee IP40

Tee T-shaped type PIPE-PIPE is designed to connect three corrugated or rigid smooth pipes of the same diameter at an angle of 90 °. Consists of two symmetrical snap-on parts for safe and quick installation.
Material: ABS plastic.
Color: RAL 7035 (gray).
Protection class IP40.

Opening tee IP40

Tee T-shaped type PIPE-PIPE is designed to connect three corrugated or rigid smooth pipes of the same diameter at an angle of 90 °. Consists of two symmetrical snap-on parts for safe and quick installation.
Material: ABS plastic.
Color: RAL 9005 (black).
Protection class IP40.

Pipe holder (clip)

The holder for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 7035 (gray).
Designed for fixing corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions. It is possible to combine holders of the same diameter or different to create groups of corrugated or smooth rigid pipes. Has a hole for attaching to wall surfaces.
Operating temperature: from -25 ° С to + 60 ° С

Pipe holder (clip)

The holder for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 9005 (black).
Designed for fixing corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions. It is possible to combine holders of the same diameter or different to create groups of corrugated or smooth rigid pipes. Has a hole for attaching to wall surfaces.
Operating temperature: from -25 ° С to + 60 ° С

Pipe holder (clip) with dowel and screw

The holder with dowel for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 7035 (gray).
Designed for fastening corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions and has a branch in the form of a dowel.
Operating temperature: from -25 ° С to + 60 ° С

Pipe holder (clip) with dowel and screw

The holder with dowel for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 9005 (black).
Designed for fastening corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions and has a branch in the form of a dowel.
Operating temperature: from -25 ° С to + 60 ° С

Clip-on pipe

holder The clip-on holder for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 7035 (gray).
Designed for fixing corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions. Has a hole for fastening to wall surfaces and with a snap fit a fully corrugated or smooth pipe of the corresponding surface diameter.
Operating temperature: from -25 ° С to + 60 ° С

Clip-on pipe

holder The clip-on holder for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 9005 (black).
Designed for fixing corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions. Has a hole for fastening to wall surfaces and with a snap fit a fully corrugated or smooth pipe of the corresponding surface diameter.
Operating temperature: from -25 ° С to + 60 ° С

Fasteners for sliding pipes The sliding

holder for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 7035 (gray).
Designed for fixing corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions. It is possible to combine holders of the same diameter or different to create groups of corrugated or smooth rigid pipes. It has a hole for fastening to wall surfaces and, with the help of a movable upper part, rigidly fixes a corrugated or smooth pipe of the corresponding diameter.
Operating temperature: from -25 ° С to + 60 ° С

Fasteners for sliding pipes The sliding

holder for corrugated or rigid smooth pipes is made of ABS plastic.
Color: RAL 9005 (black).
Designed for fixing corrugated or rigid pipes to the surface of walls, ceilings, floors or partitions. It is possible to combine holders of the same diameter or different to create groups of corrugated or smooth rigid pipes. It has a hole for fastening to wall surfaces and, with the help of a movable upper part, rigidly fixes a corrugated or smooth pipe of the corresponding diameter.
Operating temperature: from -25 ° С to + 60 ° С

Clamp holder with a coupler The

clamp holder with a coupler (clamp) is universal for corrugated, reinforced and smooth rigid pipes. Made of ABS plastic or self-extinguishing PVC.
Color: RAL 7035 (gray).
It is intended for fastening corrugated, smooth or reinforced pipes and can be used both for pipes with a diameter of 16 mm and higher in the range of circumference increments, up to 63 mm. Its difference from conventional clips (holders) lies in its versatility, i.e. one standard size of the clamp holder can be used for 4 sections of corrugated, smooth or reinforced pipes.
Operating temperature: from -25 ° С to + 60 ° С

Guide for fastening the holders The

guide has the form of a rail with grooves for fastening the holders for pipes (clips). Made of ABS plastic or self-extinguishing PVC.
Color: RAL 7035 (gray).
This solution allows you to insert into the grooves of the guide clip or holders for corrugated / reinforced or rigid pipes of various diameters, thus forming a bundle distributed over the surface. Has a perforated base for surface attachment. It is widely used for the installation of corrugated, smooth rigid and reinforced pipe systems.

F-type

holder The F-type holder is designed for fixing one or two parallel corrugated or smooth pipes to the surface of walls, ceilings, floors or partitions for pipes up to 25 mm in diameter.
Operating temperature: from -25 ° С to + 60 ° С

Corrugated pipe

plug Corrugated pipe plug is made of PE. Color: white / transparent. Designed to close the end of a corrugated pipe when carrying out additional lines (canning) or laying the pipe until finishing work is stopped or work on pouring corrugated pipes into concrete.
Operating temperature: from -25 ° С to + 60 ° С

Spring for bending rigid pipes

Material: steel.
It is made of alloy steel and is designed for bending rigid smooth pipes to form an arbitrary angle of a large radius. It is used when laying networks on walls of a special configuration with a radius or to give a certain angle to a rigid smooth pipe.

Nylon cable broach

Broach is used to pull cables and wires inside corrugated and / or smooth rigid pipes (if necessary) in case the corrugated pipe does not have its own broach in the form of a steel cable.
Nylon cable broach is made of non-combustible nylon in the form of a rigid string with iron ends for hooking cables and wires and has a long service life. Usually it allows you not to use corrugated pipes with their own broach. Thus, this solution is the most economical.

Broach for cable steel (flat)

Broach is used for pulling cables. Reusable device for pulling cable inside pipes, for example, when replacing or adding a cable. It is made of metal and has a flat structure.