Plugs, joint joints, boxes for cable duct 40 x 25 mm
Organization of workplaces
1 - Box MEX | 4 - Flat corner ML | ||
2 - Inside corner MI | 5 - Angle T-shaped MT | ||
3 - External corner ME | 6 - Installation boxes |
Boxes for installation modular SM45
To organize a workplace on the basis of MEX / ECO minichannels and EKOPLAST main channels, an assortment of SM45 modular boxes has been developed for organizing "workplaces".
Boxes are made in the form of two, three and four post modular boxes for mounting various wiring mechanisms of 45x45 mm standard.
Purpose : organization of the workplace
Material and design :
- Material: ABS plastic.
- Protection degree: IP20
- Indoor installation
- Installing mechanisms: snapping in
vendor code | Number of posts / modules for installation inside |
dimensions | For mounting with a series of trunking |
72944 | 2/4 | 109x65x45 | FUR (from 7x12 to 40x40, plinth channels 16x60 and 20x75 / INSTA (for 40x60 and 60x60) |
72946 | 3/6 | 149x65x45 | FUR (from 7x12 to 40x40, plinth channels 16x60 and 20x75 / INSTA (for 40x60 and 60x60) |
72948 | 4/8 | 109x109x45 | FUR (from 7x12 to 40x40, plinth channels 16x60 and 20x75 / INSTA (for 40x60 and 60x60) |
Boxes for installation modular SM45
Modular installation box SM45 is designed for installation of 45x45mm mechanisms in the system of mini-channels of the MEX / ECO or INSTA series (sections 40x40, 40x60mm). Material and design :
The constructive difference between the SM-45 and the SMP box is in the installation of mechanisms. The SM-45 box is made without a support. The mechanisms snap directly into the product frame.
|
Adapter (adapter)
Designed for aesthetic design of the cable duct leads to modular installation boxes type SM / SMP. Material : ABS plastic
|
Installation box SM60
Installation box SM60 is designed for installation of Eurostandard mechanisms with an inter-screw distance of 60mm. Used with mini-channels of the MEX / ECO or INSTA series The box is an element for the transition from flush-mounted to open-type wiring (i.e. surface mounting). To create multi-post structures, SM60 boxes have removable side walls that can be easily dismantled with subsequent joining of boxes into multi-post structures (no limitation). Boxes allow installation of up to five mechanisms under a five-post frame. Purpose : organization of the workplace Material and design :
|
Junction box
Distribution box for connecting bundles of cables and wires of power or low-current. Installed in systems of minichannels and cable channels and boxes. The SD 72912 box is made of a self-extinguishing ABS plastic composition and is intended for minichannels and boxes of the MEX / ECO or INSTA type. It can also be installed separately and used regardless of the minichannel or box, i.e. being elements of the transition from hidden wiring to open (i.e. surface mounting). Junction boxes for minichannel or cable ducts have inputs for various connections, without requiring the installer to use other accessories.
|
Angle flat smooth TIA standard
The flat corner is designed in "rounded design". It is intended for connection of sections of a cable channel and forming an angle of the "L" type. It is mounted directly on the end walls of the cable channel with a slight snap-in. Has an aesthetic design, reduces the installation time of the cable channel as a system.
|
Internal smooth corner TIA standard
It is mounted directly on the end walls of the cable channel with a slight snap-in. It has an aesthetic design, reduces installation time and smooths out uneven walls during installation and operation of the cable channel as a system.
|
Smooth external angle TIA standard
Designed to connect sections of a duct or cable channel and bypass the outer corner - the turn of the walls. It is mounted directly by snapping to the end walls of the cable duct. It has an aesthetic design, reduces installation time and smooths out uneven walls during installation and operation of the cable channel as a system.
|
Angle T-shaped smooth TIA standard
The tee is made in "rounded design". Designed to connect sections of the cable channel and form an angle of the "T" type. It is mounted directly on the end walls of the cable channel with a slight snap-in. It has an aesthetic design and allows you to connect three beams of ducts or cable ducts at an angle of 90 °, reducing the time for installing the cable duct as a system.
|
MF plug for cable duct
The plug is designed to close the section of the cable channel at its end - as an element of the system. The plug is mounted inside the MEX cable trunking with a slight click. Has an aesthetic design, reduces the installation time of the cable channel as a system.
|
Butt joint MU
The connector is installed at the junction of two sections of the cable channel and hides the place where these sections are connected. It is mounted directly by snapping into the end walls of the box.
|
Equipment
Minichannels of the MEX series are supplied with a full range of accessories, allowing you to install cable systems in accordance with any customer requirements. The full range of accessories can be viewed by clicking on the book below (opens in a new window).