Installation box with a lid for pouring into concrete The installation box is designed to organize a seat for any European standard wiring products with an inter-screw distance of 60 mm and an axial distance of 71 mm for monolithic concreting, has a side for mounting the cover by snapping in and leads for a corrugated pipe 20 mm. - Housing material: PP halogen - free - Installation temperature: –25 ° C ... + 90 ° C - Box height: 49 mm. - Depth of the housing of the installation box, complete with the box cover: 57.5 mm The design of the box makes it possible to increase the total depth by connecting with the next body of the same box by 40 mm (when connecting 2 boxes), by 80 mm when connecting three bodies of boxes, etc. The strong joining of the box components withstands shock loads arising from the supply of concrete during formwork pouring. It is possible to use terminals and terminal blocks, quick-clamping terminals in the box; if terminals are used, it is necessary to mount them in the box before making the kit. The center-to-center distance for fixing products in a row for a frame structure is 71 mm. The box cover is attached to the formwork with nails or self-tapping screws. After the concrete mixture has hardened, the inner part of the cover is broken off (knocked out or cut out) to form the installation space.For additional plastering of the walls, you can use a blanking cover article 44602 to close the box. - Material: PP halogen-free / PE halogen - free - Installation temperature: –25 ° C ... + 90 ° C
|
|
Code |
Name |
Number of pieces in a package |
44601 |
Box body for pouring into concrete D 70x60 mm (red) |
one |
44602 |
Flanged cover for a box for pouring into concrete (gray) |
one |
44604 |
Bottom for a box for pouring into concrete (blue) |
one |
|
|
|
|
|
Support-support for pouring into concrete Support-support is a fastener for installation boxes when pouring into concrete on the opposite formwork during monolithic concreting. To dock the support-support with the installation box, a 20 mm piece of rigid smooth pipe is used (not included in the delivery set, and is cut on site along the width of the monolithic wall). There are 4 holes for fastening to the reinforcement with steel or PA clamps or self-tapping screws (nails) in the case of a finished retaining wall. - Housing material: PP halogen-free / PE halogen - free - Installation temperature: –25 ° C ... + 90 ° C Strong connection of the calipers to each other due to the latch-lock on each side of the caliper.
|
|
Code |
Name |
Number of pieces in a package |
44603 |
Support-support for a box for pouring into concrete (gray) |
one |
|
|
|
|
|
Indoor cover for installation / ceiling box The cover is intended for using the installation box or ceiling box as a junction box, for indoor installation into the wall, as well as for decorating the ceiling box (for closing the ceiling box) with a hook for ceiling installation. The cover has two holes for cable entry to the chandelier and the output of the ceiling hook. - Material: PS (polystyrene) / ABS plastic - Degree of protection: IP 40 - Installation temperature: –5 ° C ... + 60 ° C For indoor installation.
|
|
Code |
Name |
Number of pieces in a package |
44605 |
Hook lid for ceiling box (white) |
one |
|
|
|
|
|
Ceiling box for pouring into concrete The ceiling box is a junction box with a steel hook for the subsequent suspension of the chandelier and placing the connection terminals in it during monolithic concrete construction. Before pouring the ceiling box into concrete, insert the steel ceiling hook into the box matrix and connect it with a hex nut (included in the ceiling hook kit) located in the upper part of the ceiling box and close it with a protective cap. In the body of the ceiling box, there are corrugated pipe entries: two 16 mm entries, one 20 mm entry, and one 25 mm entry. - Housing material: PP halogen-free / PE halogen - free - Cover material: PP halogen-free / PE halogen - free - Installation temperature: –25 ° C ... + 90 ° C The design of the box allows the overall height to be increased by connecting to the box body of the installation art. 44601 by 40 mm (when connecting 2 boxes), 80 mm when connecting three cases of boxes, etc. The strong joint of the components of the ceiling box withstands shock loads arising from the supply of concrete. It is possible to use terminals and terminal blocks, quick-clamping terminals in the box.
|
|
Code |
Name |
Number of pieces in a package |
44606 |
45 ° dome for flush-mounted ceiling box (red) |
one |
44602 |
Flanged cover for a box for pouring into concrete (gray) |
one |
|
|
|
|
|
Hook for ceiling boxes Ceiling hook (insulated) is a fastener for hanging chandeliers and similar lighting fixtures for installation inside a ceiling box cast in concrete. - Hook Material: Steels - Material hex nut fastener for the hook brass - of insulation material: crosslinked polyethylene - hook bearing capacity of 150 N (15 kg) of the hook length varies depending on the amount of additionally installed enclosure box installation in combination with a box ceiling and the thickness of the ceiling plaster layer.
|
|
Code |
Name |
X |
X1 |
Number of pieces in a package |
44609 |
Metal hook. for hanging chandeliers in a hanging box L-100 mm |
100 |
71 |
fifty |
44613 |
Metal hook. for hanging chandeliers in a hanging box L-130 mm |
130 |
101 |
fifty |
44614 |
Metal hook. for hanging chandeliers in a hanging box L-140 mm |
140 |
111 |
fifty |
44617 |
Metal hook. for hanging chandeliers in a hanging box L-170 mm |
170 |
141 |
fifty |
|
|
|
|
|
End sleeve for pouring into concrete End sleeve for joining corrugated pipes to the concreting formwork for organizing electrical wiring outlets from the monolith. The end sleeve consists of two connected parts with a lintel, the platform of the sleeve is attached to the formwork with nails, self-tapping screws or in another way to ensure reliable fastening of the cover to the formwork in two holes. Inside the sleeve there is a retainer with a hole for fastening the steel broach of the corrugated pipe (thread the steel broach from the corrugated pipe into the tab of the retainer and fix the broach). The corrugated pipe is snapped onto the bushing entry inside or outside the outlet, depending on the selected corrugated pipe diameter of 16/25 mm or 20/32 mm. At the end of the concrete pouring, the protective membrane of the bushing breaks out and the duct connection is ready for organizing the pulling of cables or wires,inside corrugated pipes connected to the sleeve. - Material: PP halogen-free / PE halogen - free - Installation temperature: –25 ° C ... + 90 ° C
|
|
Code |
Name |
Number of pieces in a package |
44607 |
End sleeve for pouring into concrete 16 / 25mm (red) |
one |
44608 |
End sleeve for pouring into concrete 20 / 32mm (red) |
one |
|
|
|
|
|
Installation box body for pouring into concrete The box body is designed to increase the depth of installation boxes and ceiling boxes when pouring into concrete, has a side for mounting the cover by snapping in and leads for a corrugated pipe 20 mm. The design of the box allows you to increase the total depth by connecting with the next body of the same box by 40 mm (when connecting 2 boxes), by 80 mm when connecting three bodies of boxes, etc., similarly, the depth of the ceiling box is increased using the joining of the box body installation. The strong joint of the box components withstands shock loads arising from the delivery of the concrete mixture. In the box case, it is possible to use terminals and terminal blocks, quick-clamping terminals. The center-to-center distance for fixing products in a row for a frame structure is 71 mm. - Housing material: PP halogen-free / PE halogen - free - Installation temperature: –25 ° C ... + 90 ° C - Housing height: 49 mm
|
|
Code |
Name |
Number of pieces in a package |
44601 |
Box body for pouring into concrete D 70 x 50 mm (red) |
one |
44611 |
Box body for pouring into concrete D 70 x 60 mm (red) |
one |
|
|
|
|
|
Box for installation in plasterboard and hollow walls The box for flush mounting is used in combination with corrugated or smooth pipes for branching cables, wires and installation of European standard wiring products with a screw spacing of 60 mm. The box cuts into hollow or plasterboard walls, fastened with self-tapping screws with metal lugs. - Dimensions: height 45 mm, dia. 68 mm - Case material: polypropylene - Maximum voltage 400V - Protection class IP30.
|
|
Code |
Name |
Number of pieces in a package |
44663 |
Flush-mounted box for plasterboard and hollow walls (green) |
one |
|
|
|
|
|
Flush-mounted box for solid walls Flush-mounted box is used in combination with corrugated or smooth pipes for branching cables, wires and installation of European standard wiring accessories with a screw spacing of 60 mm. Docking units allow for group installation of wiring accessories with a center distance of 71 mm. - Dimensions: height 45 mm, dia. 68 mm - Case material: polypropylene - Maximum voltage 400V - Protection class IP30
|
|
Code |
Name |
Number of pieces in a package |
44662 |
Flush-mounted box for main walls (green) |
one |
|
|
|
|
|
Box for flush mounting into main walls Box for flush mounting is used in combination with corrugated or smooth pipes for branching cables, wires and installation of European standard wiring accessories with a screw spacing of 60 mm. - Dimensions: height 40 mm, dia. 60 mm - Case material: polypropylene - Maximum voltage 400V - Protection class IP30
|
|
Code |
Name |
Number of pieces in a package |
44661 |
Flush-mounted box for main walls (blue) |
one |
|
|
|
|