Technical conditions
TU 3464-002-56625002-2002
Cable duct material
self-extinguishing composition based on PVC
Accessory material
compositions based on ABS plastic and polycarbonate
White RAL 9016, Pine, Walnut, Brown
Degree of protection
IP40 (GOST 14254)
Climatic performance
UHL placement category 4 in accordance with GOST 15150, GOST 15543
Installation and operating temperature
from -5 ° C to + 60 ° C
Storage and transport temperature
from -25 ° C to + 60 ° C
Impact strength at -5 ° C (GOST R IEC 61084-1)
at least 6 J for a series of INSTA channels
at least 2 J for a series of MEX channels
at least 0.7 J for a series of ECO channels
Conduit system design
corresponds to GOST R IEC 61084-1 (clause 9.1, 9.4, 9.6), GOST R IEC 61084-2-1 (clause 9.4.1.)
Protection class of the trunking system
0 in accordance with GOST
Resistance to combustion propagation
meets the requirements of GOST R IEC 61084-1 (section 11), GOST R 53313-2009 (clause 5)
Electric strength of insulation and electric resistance of insulation of the duct system
complies with GOST R IEC 61084-1
Compliance with fire safety requirements
complies with the Federal Law of June 22, 2008 No. 123-FZ (GST R 53313)
requirements Environmental protection requirements
Hygienic characteristics
during operation, they do not have a chemical, mechanical, radiation, electromagnetic, thermal and biological effect on the environment; do not harm the natural environment and health during transportation, storage and operation
Guaranteed shelf life of cable ducts and accessories in the manufacturer's packaging
two years from the date of manufacture
Transportation and storage
according to GOST 23216
Operation of the cable duct system
The operation of the cable duct system should be carried out in accordance with the Rules for the technical operation of electrical installations of consumers, EKOPLAST methodological instructions and EKOPLAST catalog instructions
protective film for MEX series multilayer cardboard

Treatment Cutting Manual hacksaw with a thin blade and good teeth. All types of polymer cutting machines. Automatic saw with a disc for cutting polymer profiles and pipes.
Drilling It is preferable to use high RPM when drilling and drill for stone or concrete. However, it is possible to use other drills.
Gluing Use standard plastic adhesives. For bonding the channel to stone, wood or metal, use an adhesive with recommendations for bonding these surfaces to polymers.
Mechanical properties Ultimate tensile strength > 50 N / sq.mm
Ultimate bending stress > 75 N / sq.mm
Impact strength > 15 J / m2
Electrical properties The dielectric constant 20kV / mm
Surface resistance 10 12  Ohm
Volume resistivity 10 15  Ohm
Thermal properties Operating temperature range Dynamic: from -5 ° C to + 70 ° C
Static: from -40 ° C to + 70 ° C
Linear coefficient of thermal expansion 80x10 -6   1 / K = 0.080 mm
Fire resistance Hardly flammable / self-extinguishing (horizontal combustion test (max. Temperature) = + 960 ° С) - complies with the standards of VNIIPO RF.
Dimensions (edit) Standard length 2000 mm ± 5 mm
Special length On request - length up to 7 m
Colour Standard color White (RAL 9016)
Special colors On request - from 10 km