ARC-LAN box system structure

1  - Box with ARC-LAN lid
3  - Internal variable corner with rear wall and divider
4  - External variable corner with rear wall and divider
5  - Flat corner with rear wall and divider
6  - T-shaped corner with rear wall and dividers
8  - Plug
9  - Cover for the joint of the cover
10  - Cover for the joint of the profile
11  - Support PMA-45/2 for 1 socket 45 x 45 mm or 2 modules 45 x 22.5 mm
12  - Support PMA-45/4 for 2 sockets 45 x 45 mm or 4 modules 45 x 22.5 mm
13  - Support PMA-45/6 for 3 sockets 45 x 45 mm or 6 modules 45 x 22.5 mm

The accessories have a two-piece design, which provides an increased degree of protection for cable conductors.

The radius shape meets the requirements of high-speed systems for signal transmission without loss of quality (TIA / EIA 568-A, 568-B).

The presence of dividing partitions provides cluster separation of power and information networks.

Dividing partition  - Dividing the inner space of the box into sections for separate laying of wires and cables for various purposes. A special board on the partition allows you to securely fix the cable bundles inside the section.

Cover  - reliable fastening, easy access to the wiring, width 60 mm, for mounting supports, for wiring accessories of the LK45 series or manufacturers that support the 45x45 mm standard.

Packaging  - special protective PE film on three sides, protects against contamination at the stages of transportation, storage and installation. Transport packaging in three-layer corrugated cardboard.

Internal and external variable angles

  • The design allows for mounting and avoiding non-standard angles due to the range of adjustment of the angle of adjustment from 75 ° to 120 °.
  • The increased base plate provides space for strain relief, keeping the cable from deforming.

Flat angle

  • The back wall with dividers guarantees structural rigidity and increased dielectric properties of the system.
  • Permanently-shaped, radius-shaped baffles compensate for mechanical strain on the cable, eliminating signal degradation.

Partition

  • Division of the inner space of the box into sections for separate laying of wires and cables for various purposes
  • Special bead for secure fixation of cable bundles inside the section

Joint on the joint
Allows installation on uneven walls, compensating for the height difference at the junction of the ends of the box. It is mounted by attaching it to the end walls of the box at the junction of two sections.
Consists of two parts:
  - joint for the lid joint
  - joint for the duct joint.

Wall entry  (ceiling)
The element allows installation of the cable duct entry into the wall or ceiling.

Inner corner
576111/576114

Outside corner
576214/576211

Flat corner
576311/576314

Partition
573911/573914

Cover for the joint of the cover
576514С

Cover for the joint of the profile
576511В / 576514В

Cable clamp
576714

Ceiling / wall
entry 576911/576914

T-shaped corner with back panel and dividers
576411/576414

Plug
576811/576814

Equipment
Useful section, mm 2
(S: 1.4)
Quantity
in the package,
m
Box
with lid
ARC-LAN
Partition The angle of
the internal
variable
from the rear
wall and the
separator
The angle of the external
variable
on the rear
wall and the
separator
Flat corner
with back
panel and
divider

T-shaped corner
with back
panel and
dividers
100 x 40 3170 32 576004 573914 576114 576214 576314 576414
100 x 55 4519 24 576002 573911 576111 576211 576311 576411
Wall
/ ceiling
/ shield lead-in
Plug Strap
on a joint
cover
Cover
for
profile joint

Cable clamp

PMA-45/2 support
for one
45x45 socket
for 2 modules 45x22.5
mm

PMA-45/4 support
for two
45x45 sockets or
4 modules 45x22.5
mm

PMA-45/6 support
for three
45x45 sockets or
6 modules 45x22.5
mm
100 x 40 576914 576814 576514C 576514V 576714 573909 573915 573916
100 x 55   576911  576811 576514C 576511V 576711 573909 573915 573916