Cable trays are made of galvanized steel - one of the most convenient and inexpensive devices for the construction of information and power cables. They are the most universal way of cable management and can save up to 85% of the cost of the work of laying cables. Lotka can further develop the basic electrical and low voltage systems of the building the most simple and affordable. Usually they are laid over suspended ceilings or raised floors that are easily dismantled. Trays set at an altitude of at least 2m above the ground or grounds maintenance. Basically, it involves laying tray hanger to the wall or ceiling. At the bottom of the tray with the transverse holes are made by molding the metal thickness. On the sides and corners of the tray are made extra ribs ("Ridge"). In the construction of the "lock" the tray removed sharp edges. Tray rolls in high precision and high-forming machine.

Rolling Trays industrial series are designed for installation in their open-information cable lines and electrical wiring with a voltage of 1000 V. They are used for installation on the street, and within manufacturing, retail, office and residential buildings. Clear the way laying cable lines with metal trays allows further easy to maintain electrical and low voltage systems and to develop it. Side height trays in industrial series 80 and 100 mm, which allows you to lay more cable tray and increases the payload.

Rolling trays custom sizes are designed for installation in their open-information cable lines and electrical wiring with a voltage of 1000 V. They are used for installation on the street, and within manufacturing, retail, office and residential buildings. Clear the way laying cable lines with metal trays allows further easy to maintain electrical and low voltage systems and to develop it. Side height bins from 15 to 125 mm, width is 50 to 600 mm, metal thickness from 0.55 mm to 1.2 mm. On request is possible to produce a rolling tray and cover up to 6 m.

Cable Trays are made of steel wire conductor contact welding. type of coverage as a standard electro-galvanizing (galvanizing). There are other options for surface treatment: galvanized or pre-dipping, painting with RAL color palette. - for aggressive chemical environment is proposed manufacture of stainless steel trays. wire system tray has all the necessary Accessories: - connectors, lid, septum. - for wall and ceiling mounting system is used hangers. - standard trays are manufactured from wire 3.5 mm in diameter and 4 mm. is possible to produce more power (enhanced) cable trays, wire diameter of 5 mm in width 200/300/400/500/600 mm, height 35/60/85/105 mm.

LLM brand ladders are designed on the basis of sobraznyh side profiles and 12-perforated lintels. The side profiles are produced by rolling and have an additional stiffening, which increases their load carrying capacity. Jumpers ladders have U-shaped profile, which creates a large contact area with the place cables, makes it easy to fasten the cable with plastic cable ties or wire knitting through the perforations. bridges are attached to the sidewall kabelrosta contact welding.

Material used: pre-galvanized steel, roll, GOST 1491880 marks OH-MT-2 08-PS 1.0-1.2mm thick (a method of hot-dip galvanizing). For special applications (nuclear power, tunnels, tropical climate the aggressive environment, etc.), ladders, "LLM" and their accessories can be supplied in special versions galvanized by immersion. Cable ladder are calculated on a load bearing structural steel and not regulated by any standards.